ASSEMBLY INSTRUCTIONS
STEP4: Find the 4 screws used to attach the left and right push bar braces. Align the holes for
each brace with the holes on the right panel beneath the push bar. Insert the screws and loosely
attach the braces. Locate the 2 screws which will attach each brace to the push bar itself, as
shown in the diagram below. These screws will install from the under side of the push bar
through the hole in each brace. Insert the screws and then tighten the screws attaching each
brace to the right panel. then put the service tray on it.
2 sets each side
NEXGR
ILL
KIRKL
AND
KIRKL
AND
7