20
6 Settings of the subset
6.1 Quick dial
Quick dial is an automatical call function. When quick dial is enabled and you press
on a memory key, the subset goes offhook and the number is dialled. When quick
dial is disabled, the number is showed in the display when you press on a memory
key.
Enabling and disabling of quick dial:
1. Press the - key.
2. Press the 2 - key. The - symbol in the display is turned on.
3. Press the - key to store the new entry. The - symbol in the
display is turned off.
6.2 PABX side tone
By means of the switch in the box beside the handset, it is possible to change
between two different side tone networks. Normally the switch no. 1 has to be in
position ON and switch no. 2 has to be in position OFF, but if you can hear you own
voice very loud in the handset we recommend you to change the position of switch
no. 1 to OFF and the position of switch no. 2 to ON.
6.3 Display contrast
It is possible to change the contrast of the display to optimize it according to
location where the telephone is placed.
1. Press the - key.
2. Press the 0 - key. The - symbol in the display is turned on.
3. Use the - key and the - key to set the display contrast.
4. Press the - key to store the new entry. The - symbol in the
display is turned off.
