13
14
Items Selectable Setups Functions
Squelch Level
“
SQL LEV
”
Transmission
Power
“
PWR LEV
”
Backlight
“
BACK LED
”
.
MCU software
version
display
“
SOFT VER
”
SQL 0 ~ 9
Change the squelch level of the
radio.
“
PWR LOW
”
“
PWR MID
”
“
PWR HI
”
Select transmission power among
high, medium and low levels.
“
BLED OFF
”
“
BLED ON
”
“
BL AUTO
”
Select among such modes of
backlight as
“
turnoff
”
,
“
normal
turn-on
”
or
“
auto
”
…
Eg
．“
R01.00
”
Show the software version.
9. Scan
In order to receive the calls from many channels, the radio can be
programmed to scan these channels. At most there are 16 channels
in each scan list. Each channel can use a scan list together with
others or alone. (Zone 0 is the special list, which can have 256
channels.)
9.1 Start/End Scan Function
You can press
“
SCAN
”
button directly or enable the scan through
Change the setup items in the following table as per the previous steps.
P
1
P
3
P
3
P
3
B. Press / button until
“
UTILITY
”
.
C. Press button for selection.
D. Press / button until the items you require are showed.
E. Press button for select. The radio will show the current setup.
F. Press / button to show all items that can be set with this item.
G. Press button to select this setup.
H. Press button to return to the previous operation.
①
. Enter the scan state through menu mode.
A. Press the
“
Menu Selection/Enter
”
button to enter the menu
mode.
B. Press / button until
“
SYS SCAN
”
.
C. Press button for selection.
D. Press / button until
“
SCAN ON?
”
or
“
SCAN OF?
”
E. Press button for select.
②
. Use the scan button.
A. Press
“
SCAN
”
button to activate the scan function.
B. Press
“
SCAN
”
button again to disable the scan function.
the menu. When the scan function is started, icon and your
revert channel will display .
P
3
P
3
9.2 Nuisance Delete
If a channel continuously generates noise or interference, press
the button to remove this channel from the scan list temporarily.
Note: the priority channel can't be removed and the last one in the
scan list, either.
