Kirisun M50, User Manual

Page: 23 / 33

User Manual
22
Operate the pre-programmed [Individual Call] button (side button or top button, see " programmable
button" part-2 ), enter Individual Call mode
3
）
Select an Individual Call receiver
Press the left key to select an individual call receiver in "Contact".
4
）
Make an Individual Call
After selecting an individual call receiver, confirm that the current device’s status is normal (green light
is flashing slowly), press the [PTT] key.
When the receiver is online and idle, the green light is always on. the name of the receiver and call type
are displayed on the LCD screen ;After the receiver receives the call, the green light is always on and
the name of the calling user are displayed on the LCD screen. After finished, both the indicator lights
turns green and flash slowly and the receiver ends the call with a short "beep" sound.
When the called receiver is offline or busy, the green light flashes and the LCD screen shows "no
answer", release the [PTT] key to end the call, the LCD screen will get back to previous status
After the calling finished, device of calling directly returns to previous status. If the receiver presses the
[PTT] key again within 5 seconds, it can make individual call and talk again. Otherwise, without any
operation, the device of receiver will automatically exit after 5 seconds and returns to the status before
calling.