background image

FP520 Digital Two-way Radio                                  Instruction Manual 

 

II 

 

 

Important Information 

Copyright 

Kirisun and our authorized partners own the intellectual property of all the parts of this product (include 

accessories). Any design and materials may not be modified, copied, extracted or translated without the 

authorization of Kirisun or its authorized parities. 

Due to the update or modification of the product, Kirisun owns the right to change the specifications of software 

and hardware described in this manual without further notice. Specifications and information contained in this 

manual are for reference only.   

 Safety Information 

Compliance with RF Exposure Standards   

Your radio is designed and tested to comply with a number of national and international standards and guidelines 

(listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the 

IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors 

of up to 50% transmitting. In terms of measuring RF energy for compliance with the IEEE and ICNIRP exposure 

limits, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is 

Summary of Contents for FP520


























Reviews: