Kirisun DP770, Instruction Manual

Page: 38 / 46

DP770 Digital Portable Radio Instruction Manual
28
z
During the radio waiting for the acknowledgement period after the "Radio Stun/Revive"
command being sent out, the radio can terminate the command and exit "Radio Stun/Revive"
mode by pressing key.
z
Or if the retry times of sending "Radio Stun/Revive" command reach its maximum times, the
radio will automatically exit this mode and displays "Disable/Enable Request Failed".
9.4 Radio Kill/Active
This function allows you to send the "Radio Kill" command to kill another radio. The killed radio will
delete the main programmed parameters and power off automatically, and it can’t work even if
power on again.
The killed radio only can be activated by authorized dealer or manufacturer.
This function is used to prevent any usage of the lost radios and illegal reading of programming
parameters.
Note:
z
Once the radio is killed, the programmed parameters will be lost, and the radio can’t work again.
z
The killed radio only can be activated by authorized dealer or manufacturer.
Receiving a Radio Kill
After receiving the "Kill" command correctly, the radio will automatically reply "Successful ACK".
Otherwise it will reply "Failed ACK" information.