8
Instantaneously Monitor
Press the side button set as “Instantaneously Monitor” to turn off QT, DQT, 2-Tone and 5-Tone
and release it to return to normal work.
Temporarily Cancel Noise Channel
When the radio pauses on a certain channel during scanning, press the button set as
“Instantaneously Cancel Noise Channel” to delete this channel from the scanning list temporarily.
Cancel Noise Channel
When the radio pauses on a certain channel during scanning, press the button set as “Cancel Noise
Channel” to delete this channel from the scanning list permanently. The radio won’t scan this
channel again after turning on the radio or it exits scanning.
Check Squelch Level
Press and hold the button set as “Check Squelch Level” to hear the squelch level annunciation of
the current channel.
Adjustable Squelch
Press the button set as “Adjustable Squelch” to change squelch level. Press once to increase one
level (cycle of 9-0; when at level 0 a beep sounds and squelch is activated) and store the change.
Scan
a)
Press the button set as “Scan” to start scanning. When in scanning, the radio checks signals on
each channel; it stops scanning and pauses on the channel on which signals are detected until
the signals disappear. If a delay time has been set between the interval of signal disappearing
and scanning restarting, the radio will keep staying on that channel if it receives any signals
during the delay time.
b)
The working channel of the radio will revert to the following channels automatically when
you press PTT button during scanning. The dealer can select one among the following six
options.:
1) Selected channel
When pressing PTT button, the radio will transmit from the first channel in the scanning
list.
2) Selected c currently working channel
When pressing PTT button during scanning, the radio will always transmit from the first
channel in the scanning list. When pressing PTT button during the scanning pause, the
radio will always transmit from the currently working channel
3) Priority channel
The radio will transmit from the priority channel in the scanning list when you press PTT
button.
4) Priority c currently working channel
When pressing PTT button during scanning, the radio will always transmit from the
priority channel. When pressing PTT button during the scanning pause, the radio will
