HOW TO CHANGE THE BANDS
1
Locate the small holes and set screws at
the end of the watch lugs on the crown
side, this is where the band attaches to
the watch.
2
The set screw is 22.5mm long and goes
from one side of the watch lugs to the
other. Use the provided screwdriver to
unscrew the set screw until the threads
fully release—you should feel less tension
on the set screw. The set screw will not
be fully removed, at this point pull the
screw all of the way out.
3
To install a new strap, reverse the order of
the strap removal procedures.
DO NOT
OVER TIGHTEN THE SET SCREWS
, the
screws only need to be snug.
1
2
7
