8
© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613008
Controls And Connections
Section 5
Controls And Connections:
Before using the KMDSI 415-107 Diver Communication System, you should
familiarize yourself with its operating controls and connections. Improper use of
controls and connections will deprive the user of the full benefits of this com-
munication system
Tender Controls
Power Switch–
Applies power to the unit from internal batteries or from
external source.
Speaker Switch–
Turns panel speaker and microphone on/off. It may be
necessary to turn speaker off when using a headset to prevent feedback
Push To Talk All Divers Switch–
This Switch allows tender to divers
communication in 2-wire mode. (No push to talk is required when operating in
4-wire mode, if using a headset/boom microphone combo). In 4-Wire mode, this
switch allows the tender to interrupt divers with a priority message; all divers
will be listening.
Earphone Volume–
Controls panel speaker and/or tender headset volume.
Use as master volume control, clockwise increases volume.
Battery Condition Indicator–
Steady GREEN light indicates battery volt-
age level is good. Blinking GREEN light indicates battery voltage is approach-
ing a low level. Steady RED light indicates battery voltage is below the level
necessary to guaranty proper operation.
B
WARNING
When Battery Condition indicator is steady RED light, communi-
cation will stop.
Panel Speaker–
5 inch round speaker, operates when Speaker Switch is ON.
