background image

5. 

OPERATE THE GENERATOR SET

5.1Operate the generaor set

1. Warm up the engine without load three minutes.

2. Concerning the generator set with Low Oil Alarm System, check that the Low 

oil alarm Lamp is not lit.

CAUTION

For the generator set with Low Oil Alarm System, the Oil Alarm Lamp will 
activated by low oil pressure or engine oil shortage, simultaneously, the 
engine will stop. The engine will stop immediately if restarted without 
refilling the engine oil. Check the oil level and refill.

Do not loosen or readjust either the engine speed limiting bolt or fuel 

injection limiting bolt, the performance will be affected.

5.2 Checks during the running
1. Whether there is abnormal sound or vibration;
2. Whether the engine misfires or runs rough;
3. Check the color of the exhaust. (Is it black or too white?)
    If you notice any of the above-mentioned phenomenon happened, stop the en-
    gine and find out the fault cause or contact with KIPOR agent.

If the engine has been running, the muffler will be very hot. Be careful not to 

touch the muffler.

Never refill the fuel tank while the engine is running.

CAUTION

Fluorescent

lamp

Motor

   driven

equipment

X1

X2

X3~5

X1

X1.5

X2

100VA

(W)

100VA

(W)

80VA

(W)

60VA

(W)

450-750VA

(W)

300VA

40W

100W

switch power 

Rectify power

X2

X2

Computer UPS 

power 200W

400VA

400VA

6.3 Electrical appliance particularly motor-driven equipment will produce very 
high current while starting, the below table provides the reference for connecting 
these apparatus to the generator set.

    
   APPLIANCE      STARTIN  GRATED

Refrigerator
150W

TYPICAL
APPLIANCE

TYPE

   WATTAGE

EXAMPLE

STARTIN  GRATED

Incande-

scent lamp

Heating

appliance

Incande-
scent 
lamp

TV

Incande-
scent 
lamp

Fluorescent
lamp

Fluorescent
lamp

Refrigerator

Electric fan

Motor Electric 

drill Computer

 UPS power

Summary of Contents for K DE12000E





















Reviews: