7
-2
MaiNteNaNce
you can get burnt badly by
hot oil. Make sure to work on
it after it is sufficiently cooled
down.
•
WARNING
7
11. Wipe the differential case and its
surrounding with a rag thoroughly.
12. test drive the vehicle for 5 to 10
minutes to check for leakage.
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine and let the engine
cooled down sufficiently.
ChECkING AND ChANGING REAR AXlE oIl (U)
3. clean around filler plug, then re-
move the filler plug.
4. check that the differential case
surface is not hot. then, check the
oil level and condition with a finger
bent slightly. if you cannot reach
the oil, it means the oil level is low.
add some oil.
UT3o738A
(1) filler plug
5. if the color or viscosity of the oil is
not normal or it is at the oil change
interval, change the oil.
6. to change oil, place a container
with wide opening under the drain
plug. then, remove the drain plug.
7. after draining all the oil, install the
drain plug firmly.
UUVo739A
(1) Drain plug
UD130(MEC2230SW)-유럽향-07.indd 29
2015-10-28 오후 12:01:58
Summary of Contents for MEC 2230SW
Page 112: ...MEMO MEMO UD130 MEC2230SW 05 indd 28 2015 10 28 4 46 44...
Page 116: ...MEMO MEMO UD130 MEC2230SW 06 indd 4 2013 12 18 7 16 00...
Page 165: ...TROUBLESHOOTING vehicle Troubleshooting 9 2 9 9 UD130 MEC2230SW 09 indd 1 2013 12 18 7 25 06...
Page 173: ...10 INDEX index 10 2 10 UD130 MEC2230SW 10 indd 1 2015 10 28 11 54 16...