Kioti KL2042, Operator'S Manual, Page: 12 / 40

9
3.7 REPOSITIONING THE
ANTI-CHIPPING WHEELS
For transport reasons, the anti-
chipping wheels (1) are fastened on
the top hole. In order for them to
work properly, the anti-chipping
wheels (1) must be repositioned in
the hole which is most suited for the
type of ground ( 5.4.5).
3.8 FITTING & USING THE MULCHING PLUG (OPTIONAL)
NOTE
The mulching
plug kit is not supplied as standard
on all models. The mulching plug kit
is not factory assembled.
WARNING!
Always fit &
dismantle the accessory with the
engine off, after removing the
ignition key and engaging the
parking brake. You always need to
work with the stone-guard fitted
properly even when using the
mulching plug accessory.
To fit, lift the stone-guard & place the
mulching plug over the cutter deck
opening.
Ensure the inner rib (2) of the Mulching
Plug locates inside the opening of the
cutter deck.
Roll the mulching plug into place so
that the rib (1) inserts beneath the
stone guard hinge (3).
Insert bolt from underside of cutter
deck, through the plug and secure on
topside using pin clip.
Before use or turning on the machine,
check that the plug is secure.
1
3. UNPACKING AND ASSEMBLY (cont.)
1
2
3
4