Kioti CS2220H, Manual

Page: 178 / 190

9
-
CS2220H(S)/CS2520H(S)
causE counTErmEasurEs
1. When engine is difficult to
start

Fuel is thick and doesn’t flow.

Check the fuel tank and fuel filter.

Remove water, dirt and other impurities.

All fuel will be filtered by the filter, if there should be water of
other foreign material on the filter, replace the filter.

Air or water mixed in fuel sys -
tem.

If air is in the fuel filter or injection lines, the fuel pump will
not work properly.

To attain proper fuel injection pressure, check carefully for
loosened fuel cap nut, etc.

Loosen air vent screw over fuel filter and fuel injection pump
to eliminate all the air in the fuel system.

Thick carbon deposits on
orifice of injection nozzle.

This is caused when water or dirt is mixed in the fuel. Clean
the nozzle injection piece, being careful not to damage the
orifice.

Check to see if nozzle is working properly or not, if not,
install a new nozzle.

Valve clearance is wrong

Contact KioTi dealer.

Engine oil become thick in
cold weather and engine
cranks slow.

Change grade of oil according to the weather (temperature).

Actuator driver malfunction

Check the actuator and wire connection

Speed sensor malfunction

Check the speed sensor and wire connection.
Adjust the air gap between ring gear and the tip of sensor
This troubleshooting chart summarizes simple service items for users who are familiar with mechanical systems.
For more detailed service items, contact your local
KioTi Dealer.
EnginE TroublEshooTing
CS2220H(S),CS2520H(S)-미국향-09.ind2 2 2020-03-24 오후 3:37:58