2-7439
Page 5 of 6
F-3984
4-04-06
INSTALLING BUCKET OR ATTACHMENT
Refer to loader operator's manual to install bucket or
optional attachments.
WARNING:
Always have a bucket
attachment mounted to loader when it is
removed from tractor. Pallet fork, bale
spear or similar attachments are too light
to safely counterbalance loader boom
arms when loader is dismounted from
tractor.
ATTACH LEVEL INDICATOR FOR BUCKET OR
ATTACHMENT (Figure 8)
Refer to assembly instructions provided with bucket or
optional attachments to aitach level indicator rod.
NOTE:
Attachment level setting varies for each loader
attachment. It is important to make sure level indicaior
is adjusted to indicate level whenever a different
attachment is mounted, or else level indicator will not
indicate true level.
To adjust level indicator properly, locate tractor and
loader attachment on a firm level surface with attach-
ment resting on level surface in operating position.
Loosen U-bolt that fastens level indicator bracket to right
tilt cylinder and position it so it is centered on the offset
in level indicator rod, then retighten U-bolt hardware.
Figure 8
tightener band
level guide tube
level indicator rod