KINSMAN KPA500 User Manual Download Page 4

Know these safety symbols

 

 
The ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical 
shock. For the safety of everyone in your household, please do not remove product covering. 
 
The ‘exclamation point’ calls attention to features for which you should read the enclosed 
literature closely to prevent operating and maintenance problems.  
 

WARNING:  

To reduce the risk of  fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such 
as vases, should not be placed on this apparatus. 

Important Safety Instructions

• Read these instructions. 
• Heed all warnings. 
• Follow all instructions. 
• Do not block any ventilation openings. 
• Do not install near any heat sources such as radiators, fan heaters, stoves, or other units that produce heat. 
 
Protect the power lead from being walked on or pinched, particularly at plugs, and the point where they exit from the amplifier. 
 
• Unplug this amplifier during lightning storms or when unused for long periods of time. 
 
• Refer all servicing to qualified service personnel. Servicing is required when the amplifier has been damaged in any way, such as 
power supply lead or plug is damaged, liquid has been spilled or objects have fallen into the unit, or the unit has been exposed to rain 
or moisture, does not operate normally, or has been dropped. 
 
• Never remove the casing of this apparatus. 
 
• Never lubricate any part of this apparatus. 
 
• Never place this apparatus on other electrical equipment. 
 
• Keep this apparatus away from direct sunlight, naked flames or heat. 
 
Only connect the power supply lead to an earth grounded AC receptacle in accordance with the voltage and frequency ratings on the 
rear panel of this product. 
 

WARNING:

 To prevent damage, fire or shock hazard, do not expose this unit to rain or moisture. 

 
Unplug the power supply lead before cleaning the unit exterior (use a dry or slightly damp cloth only). Wait until the unit is completely 
dry before reconnecting it to a power source.  
 
This product should be located away from heat sources such as radiators, fan heaters, or other products that produce heat. 
 

WARNING: THIS APPARATUS MUST BE EARTHED! 
 

This product is supplied with an earthed plug. This is a safety feature. If you are unable to insert the plug into the outlet, contact an 
electrician to replace your obsolete outlet. Do not defeat the safety purpose of this plug. 
 

CAUTION: DO NOT

 attempt to remove the amplifier chassis, there are no user serviceable parts inside, refer servicing to qualified 

personnel only. 
 
Hazardous voltages may be present within the cabinet even when the power switch is off and the power lead is disconnected. 
 

NEVER

 attempt to bypass the fuses or fit ones of the incorrect value. 

 
Kinsman amplifiers and loudspeaker systems are capable of producing very high sound pressure levels which may cause temporary or 
permanent hearing damage. Use care when setting and adjusting volume levels during use. 
 
Your product is designed and manufactured with high quality materials and components, which can be  recycled and reused. 
 
When a crossed-out wheeled bin symbol is printed on a product it means that the product is covered by the European Directive 
2002/96/ EC. 
 
Please inform yourself about the local separate collection system for electrical and electronic products. 
 
Please act according to your local rules and do not dispose of your old products with your normal household waste.  
Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. 
 

Environmental information

 

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard 
(box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your amplifier consists of materials which can be 
recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of 
packaging materials, exhausted batteries and old equipment. 
 

CLEANING:

 Do not clean the plastic enclosure with solvents or other  

chemical based cleaning products. Use a microfibre cloth or similar  
to clean the system.

WORLDWIDE TRADE DISTRIBUTORS:  

JHS. SALEM HOUSE, PARKINSON APPROACH, GARFORTH, LEEDS LS25 2HR, UK. 

©2021 JHS. Specifications are subject to change without prior notice. Kinsman is a registered trade mark of JHS.

 

Reviews: