Lubrication oil replacement of final gear case
a.
Remove the gear case cover.
b.
Place the ATV on a flat surface.
c.
Place a container under the final gear case.
d.
Remove the oil filler bolt and the drain plug to drain the oil.
e.
Install the drain plug and tighten to the specified torque:23Nm(2.3m.kg)
f.
Fill the final gear case with oil.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil.
Oil quantity:
Periodic oil change:0.25L(0.21 Imp qt,)
Total amount:0.27L(0.23Imp qt)
Lubrication oil of front drive gear case
a.
Measure of lubrication oil of front drive gear case.
Place the ATV on a level place. Remove the oil filter bolt and check the oil level. It
should be up to the brim of the hole. If the level is too low, add oil to raise it to the
proper level..
b.
Install the oil filter bolt and tighten to the specified torque 12Vm(1.2m.kg.8.7ft.16f)