Kinova Link 6 User Manual Download Page 246

Page: 246 / 296

EN UG-020 Link 6 user guide r1.0

238

The

Monitoring

pages display the live feedback from the sensors on the robot, as well as vallues

computed from that feedback. Computed values include TCP position and velocity, among

others.
To access the robot

Monitoring

page, tap >

Diagnostics

Monitoring

Figure 196: Overview pane of the Monitoring page

The page is divided into two panes.
•

Overview

•

Detailed

Both panes have a

Data Snapshot

button. To use the snapshot button, you must either have a

Universal Serial Bus (USB)

in the port on the controller or you must be working from a computer.

Tapping

Data Snapshot

saves a JSON file that contains all the information displayed on the pane

you are viewing in the

Monitoring

page.

Besides saving a snapshot of the robot and viewing the robot, you can change the Actuators

table to invert the top row with the first column.

Overview pane of the Monitoring page

The

Overview

pane displays an overview of the position and state the robot is currently in.

It is subdivided into four main parts.
•

Controller

•

Actuators

•

End Effector

•

Flange Pose

+1 514-277-3777

kinovarobotics.com

Summary of Contents for Link 6




































































































































































































































































































Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands

Kinova Link 6, User Manual

Search results

Summary of Contents for Link 6

Reviews:

Related manuals for Link 6

Brands by name

Popular brands