FP 25 E
Issue: 06/2011
60
5 .3
Rewind, Make-Up and Tear-Down a Program
X
NOTE
Z
FP 25 E with a spool tower is suitable to rewind, make-up and tear-down a program.
Z
FP 25 E with a standard spool rack (1 electronic friction drive) is not able to rewind,
make-up or tear-down a program, you have to use, e. g. a MUR 2000/5000 motor
rewinder or a UT 600/2000 rewind table.
Z
FP 25 E with an optional spool rack (2 friction drives) can be used to rewind a
program.
5 .3 .1 FP 25 E with Spool Tower: Make-Up, Tear-Down and Rewind Operation
Back view
Front view
1. Put the
full film reel
onto the
fore side
friction shaft
5. Thread the film through the rear
guide
rollers on
the
projector head
2. Thread the film via the
fore side lever arm
6. Thread the film through the guide rollers on
the
rear extension arm
3. Thread the film through the guide rollers on
the
fore side extension arm
7. Put the
empty film reel
on the
rear
take-up friction shaft
4. Thread the film via the
fore side guide
roller on
the
projector head
X
NOTE
The film must be threaded through the
fore side lever arm
only.
Summary of Contents for FP 25 E PREMIERE
