Kino Flo Kamio Kit, Operation Manual

Page: 4 / 6

Note:
The Kamio is not recommended for older lenses without a fixed barrel. Fixed
barrel lenses are designed to support the weight of the Kamio and keep the fixture
properly oriented.
.
The
Kamio Ring Light is designed to mount directly to the camera lens. An
expandable clamping ring is designed to fit lenses with an outside diameter
of 112mm. ( eg.Panavision Primo Primes). Turn the locking screw to clamp
down on the lens. Lens adapter rings are available to accommodate various
smaller lens diameters. ( see “Accessories” for details )
Filter Tray
holds a maximum of two
4” x 5.65” filter holders. Each filter holder
has a detent on one side of the frame. To
properly secure the holder, the detents
should align with the two small pushball set
screws on the tray.
The tension can be adjusted by using a
flat jeweler’s screwdriver
(1) to vary the
depth of the screw setting. The silver
thumbscrews
(2) lock the filter trays in
position. Lens Clamp (3) , locks Kamio to
lens.
Changing Lamps
Extract the lamp by pushing
the lamp harness through the
reflector. The lamp will clear
the reflector making it easier
to grasp.