Image Yoke Mount
The Yoke has a ½” hole to accept industry standard
mounting hardware.
The
Image L80 LED Yoke Mount
can hang from a
grid by a junior pipe hanger using a Junior Pin Assembly
for Yoke
(MTP-I80)
, sold separately.
The
Image L40 LED Yoke Mount
can also hang from a
grid by a junior pipe hanger using a Junior Pin Assembly
for Yoke
(MTP-I80)
or hang from a baby pipe hanger
using a Baby Receiver Assembly for Yoke
(MTP-I40)
,
both sold separately.
Note: Because of weight capacity, the
MTP-I40
can only
be used on the Image L40 LED Yoke Fixture.
MTP-I80
Junior Pin Assembly for Yoke (28mm)
MTP-I40
Baby Receiver Assembly for Yoke (16mm)
The Yoke Mount is also designed with two holes to allow
the yoke bracket to be placed in one of two positions.
The additional option is useful when hanging the units
in a studio with a low ceiling.
Warning: Use only 10-32 x 3/8” screws (supplied) to assemble yoke.
Note that threads on the fixture are self-locking and may seem tight.
Replacement screws: Part No. 2020058
Recommended torque setting:
USA: 18 lb-in
Metric: 2 Nm
6
2
1
