8
4Bank DMX Control Panel
A)
Circular Output Connector
: Provides electrical power to the lamp head
with the use of a 4Bank extension cable.
B)
DMX-In & DMX-Out
: DMX-In receives DMX signals from Dimmer Board.
DMX-Out relays DMX signals through other Fixtures or Instruments.
Note:
Each BAL-457 ballast has an “
AUTO TERMINATE
”
feature. The last ballast that does not have an XLR cable attached
to the DMX “Out” port will automatically terminate.
C)
DMX Address
: Sets DMX Address of Fixture.
(Channels 1~4 = Lamps; Channel 5 = 4ft/2ft)
D)
DMX OK
: Lights if valid DMX signal is present and conforms to
DMX512/1990 protocol.
E)
Manual Switches
: Turns lamps on and off manually.
F)
Lamp Select Switch
: Set to
4ft
for 4ft lamps and
2ft
for 2ft lamps.
G)
Fuse
: Provides circuit protection. Note: If Fuse is “blown” or “open”,
replace with same type of fuse rating as marked.
A
B
C
D
E
F
G
