Celeb 401 DMX Control Panel
A) Kelvin Preset Buttons:
Kelvin buttons come preset at the factory.
Factory defaults left to right are: 2700K, 3200K, 4500K, 5500K, 6500K.
User can also use these preset buttons to store custom Kelvin settings.
B) DMX ADDRESS
– Use to set DMX address. The Celeb 401 automatically
assigns 2 channels. First Channel controls Dimming; Second Channel
controls Kelvin.
C) KELVIN / DIM:
In KELVIN mode, an amber light appears to the left of
the button and Kelvin is displayed. Press the button again to change to
DIM mode. In DIM mode, a green light will appear to the left of the button
and Dim level is displayed.
D) Display:
Provides Kelvin, Dim level and software revision data.
E) LOCK / RESET:
In
LOCK
mode, an amber light is displayed to the left
of the button. In
RESET
mode, the indicator light is green. To reset to
factory presets, hold the
LOCK / RESET
button for 5 seconds.
F) On / Off: On
= Green light displayed.
Off
= Amber light displayed.
G) Kelvin / Dimmer Knob:
Manually adjusts Kelvin or Dim levels.
Press the knob to toggle between fine and coarse adjustments.
Note:
Each Celeb 401 DMX fixture has an “
AUTO TERMINATE
” feature.
The last fixture that does not have an XLR cable attached to the
DMX “Out” port will automatically terminate.
4
A
B C D E
F
G
