KINKI STUDIO
03
3. Connections
Connect the power cord to the IEC inlet of the amplifier and plug it into the power plug socket.
For safety reasons, a 3-wire grounding (earth) plug must be used, whenever possible.
In order to get the best sound from the amplifier, avoid using any multiple plugs socket or
extension cords.
You may use either RCA or XLR connection to source devices. The XLR Pinout is as follow:
- Pin 1 (Shield)
- Pin 2 (Hot)
- Pin 3 (Cold)
Output – Front Panel
Phone 1 – Balanced Output Connector
Phone 2 – High Impedance Headphone ( >= 400ohms)
Phone 3 – Low Impedance Headphone
Output – Rear Panel
XLR Output – Bypassed Passive Volume Controlled Output
