7
Kinivo BTH360-S Bluetooth Stereo Headset
Note:
Pairing mode will last 2 minutes. If the headset can not connect to any other
devices within 2 minutes, it will automatically switch to standby mode with
blinking blue light.
2) Pairing with one device
Before you use your headset for the first time, you will need to pair it with a
Bluetooth-enabled cell phone. Pairing procedure may vary depending on the
model of cell phone you use. Please refer to your cell phone user’s manual for
further information. The general pairing procedure is as follows:
1. Please keep the headset and mobile phone within one meter of each other
when pairing
2. Activate the headset’s pairing mode. (Please refer to “How to enter pairing
mode” above.)
3. Activate your mobile phone’s Bluetooth function and search Bluetooth
devices within available range. When the phone presents a list of devices
found, select “Kinivo BTH360-S” from the list.
4. When prompted by your cell phone to enter password or PIN, enter “0000”
and press the “Yes” or “Confirm” button to confirm.
5. After pairing successfully, choose “Kinivo BTH360-S” from the list of devices
shown.
6. After the headset is connected successfully its blue light blinks 2-3 times
every 4 seconds.
