Charging the headset
First time charging:
Before you first use your BTH360-S Bluetooth headset, please charge the
battery fully.
Low battery:
Low battery power is indicated by three “DONG” tones repeated every 30
seconds and the Red LED status indicator light blinking twice in a row.
Charge the headphones using the USB cable:
1. Plug USB cable into any computer USB port or USB charger.
2. Plug opposite end of USB cable into headset’s charging port
RED light on >> Charging
RED light off >> Finished charging
3. It will take about two hours to charge the headset fully.
Warning:
The internal battery is recyclable.
Please contact your local electronics recycling program for disposing the
headphones in a safe and environment friendly way.
4
FAQs
1. What does it mean when the red LED blinks twice every 30 seconds?
Battery power is low; battery needs to be recharged.
2. Why is the red LED off when the headset is charging?
A) Please make sure the charging device is properly connected to the headset.
B) After a long period of disuse, the headset’s battery may run down. In this case,
you will need to charge thebattery for 30 minutes, and then the red LED will
come on and the headset will continue charging.
3. What is the effective range between the headset and a mobile phone?
The maximum range of the headset is 10 meters. The actual range may vary in
different environments.
4. My mobile phone is searching; why can’t it find the headset?
The mobile phone will not find the headset if the headphones are not in
pairing mode. Make sure that the headset is in pairing mode - the red and the
blue led should be blinking alternatively. They should also be in an effective
range.
5. Why can’t I hear the voice of the person I am talking to?
A) Make sure the headset has been switched on;
B) Make sure the volume is not too low or muted;
C) Make sure the headset is properly connected to your mobile phone; and
13
