Kinivo BTC460 Bluetooth Car Kit
10
Troubleshooting
1. Unable to pair to device / Device no longer connects
to BTC460
Ensure that the BTC460 car kit is in pairing mode by pressing and holding the
multifunction button for 3 to 4 seconds (alternating blinking red and blue LED).
Now open the Bluetooth configuration on the device you are trying to pair to
and scan for Bluetooth devices. You should see the BTC460 - proceed to pair and
connect the car kit.
Please refer to the Operation section for Bluetooth Pairing.
2. No audio when playing music or when using phone
Please make sure of all of the following
Check if the Bluetooth connection between your phone (or other Bluetooth
capable device) and the BTC460 is active.
Powered on
Blinking blue
Pairing mode
Alternating blinking blue and red
Standby mode
Slow blinking blue
