Kingxxel Tools Co M1E-LD-115 Operator'S Manual Download Page 6

 

 

To  ensure  that  the  power  tool  is  safe,  have  it  serviced  at  your  local  hardware  store 
using only identical replacement parts.  

 
Special safety warning for this product

 

 

Only use this tool in daylight, or good artificial light.

 

 

When in use, keep all parts of your body away from the cutting blade. Do not remove 
cut material or hold material to be cut when the blades are moving.  

 

Make  sure  the  power  switch  is  off  when  clearing  jammed  material.  A  moment  of 
inattention while operating the machine can result in serious personal injury. 

 

Carry  the  tool  by  the  handle  with  the  cutter  blade  stopped.  When  transporting  or 
storing  the  tool,  always  fit  the  blade  protector.  Proper  handling  of  the  machine  will 
reduce possible personal injury from the blades. 

 

Only switch the motor on when your hands and feet are away from the cutting blades. 

 

Always  disconnect  the  machine  from  the  power  supply  whenever  the  following 
conditions apply: 

-

 

Whenever leaving the tool unattended. 

-

 

Before clearing a blockage. 

-

 

Before checking, cleaning or working on the unit. 

-

 

After striking a foreign object. 

-

 

Whenever the tool starts vibrating abnormally. 

 

Always ensure that the ventilation openings are kept clear from debris. 

 
Battery/Battery charger safety warnings 
 

 

 

To prevent the risk of electric shock, protect the battery charger from rain and moisture.  

 

Recharge the battery only with the charger provided. A charger that is suitable for one 
type of battery pack may create a risk of fire when used with another battery pack. 

 

The supplied battery charger is only suitable for charging the trimming shears and, to 
prevent the risk of fire and explosion must not be used for charging any other tool. 

 

Before each use, check the battery charger, cable and plug for signs of damage. If the 
battery charger is damaged, do not use it or attempt to repair it. Instead take it to your 
local  hardware  store  for  repair,  as  damaged  battery  chargers,  cables  and  plugs 
increase the risk of electric shock. 

 

To  prevent  the  risk  of  fire,  do not  operate  the  battery  charger  on flammable  surfaces 
(e.g. paper, textiles, etc.) or in combustible environments.  

 

If  the  trimming  shears  are  dropped,  or  subjected  to  a  hard  impact,  liquid  can  be 
ejected from the battery. Should this liquid accidentally contact your skin, immediately 
flush  the  area  with  water  as  it  can  cause  irritation  and  even  burns.  Should  the  liquid 
contact your eyes you will also need to seek medical attention. 

 

To prevent the risk of short circuit, do not open the battery yourself. 

 

To  prevent  the  risk  of  explosion,  protect  the  battery  from  heat,  such  as  continuous 
sunlight or fire. 

 

To prevent the risk of explosion, do not short-circuit the battery.  

 

If the battery becomes damaged due to improper use, vapour may be emitted. Should 
this  happen  get  fresh  air  and  consult  a  doctor  should  any  respiratory  complaint 
develop. 

 

Summary of Contents for M1E-LD-115


















Reviews: