Kingwo LT03, User Manual

Page: 6 / 18

LT03
2
Chapter 2: Product features
1. The product is a rechargeable ultra-long standby position and monitor terminal;
2. This product is with built in with large-capacity industrial grade rechargeable polymer lithium
battery, capacity 5600mAH, voltage 3.6V;
3. This terminal supports most of 2G,3G and 4G network in the world, it would satisfy the requirements to use this
product in different regions or cross boarders.4G network only support TDD LTE/FDD LTE,3G network supports
WCDMA, 2G network support GSM/GPRS
4.
The normal working status of the terminal is defined as follows: The GSM module and the
positioning module are all open and work normally. The terminal uploads position information
every 30S, and the GSM continues to work without sleep; the positioning module always works
regardless of whether there is a GPS signal.
5.
The power-saving status of this terminal is defined as follows: in the power-saving mode, GSM sleep,
awake timely to upload a message (default interval 10 minutes); the positioning module is
completely closed, inaccurate position; in the power-saving state, it can be waked up via telephone,
SMS, GPRS wake up the terminal at any time;
6.
The terminal is built in with high-sensitivity low-power three-axis G-sensor accelerometer, full-time
work, it can real time detect the working environment of the terminal , suppress the static drift and
automatic switch the terminal working mode
7.
The terminal supports micro-USB interface charging on the market, the charging specification is
DC5V, 1A, compatible with most mobile phone chargers;
8.
The equipment is divided into two versions: normal version and strong magnetic version; the strong
magnetic version has a built-in neodymium iron boron super permanent magnet, and has removal
alarm function.
GPS Talks