9
To run room monitor function, two units are used : detector unit (listen) and
monitor unit (play).
To setup a detector, enter menu mode, go to function menu, select room
monitor function on. The unit will lock at detector mode and wait for
monitor unit to connect. Press [ESC] key to function off menu. Press
[ ] to return to standby mode.
To setup a monitor, press [INT] + detector unit number to connect to
detector. Handset : Press [ ] key to quit room monitor function.
In case of external ring in during room monitor mode, detector will keep
silent and monitor will be ring. To answer call, press [ ] key at
monitor and detector will keep state at detector mode and wait for next
connection. After phone call is finished, press [INT] + detector unit number
to reconnect detector again.
10. Baby call function
Baby call is a function to provide a quick dial out a predefine number by
pressing any key. This is used for child or baby to call their parent just
simple press any key on the keypad.
To turn on the function, enter menu mode, go to function menu, select
baby call function on. A telephone number (up to 24 digit) should be input,
this is for quick dial access.
. Room monitor function
8
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury to individuals.
1. Read and understand all directions.
2. Follow all warnings and instructions.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.(i.e. Near a bathtub, kitchen sink, washing
machine, in a wet basement, or near a swimming pool.) Avoid spilling liquid
on the product.
5. Do not place this product on an unstable cart, stand, or table. Serious
Damage may occur to the product if it falls.
6. Do not allow anything to rest on the telephone cord. Do not locate this
product where the cord might be damaged by persons walking on it.
7. Never put foreign objects of any kind into the product as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or
electrical shock.
8. To reduce the risk of electric shock, do not disassemble this product, take it
to a qualified service person if service or repair work is required. Opening or
removing cover may expose you to dangerous voltages or other risks.
Operate after Incorrect reassembly can cause electric shock.
9. Adjust only the controls that are covered by the operating instructions.
Improper adjustment of controls may result in malfunction that could require
extensive work by a qualified technician.
10. Refer servicing to qualified service personnel if the following should occur:
If the phone line or plug is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following operating instructions.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance.
11. Avoid using a telephone during an electrical storm. There may be risks of
electric shock from lightning.
12. Do not use the telephone in the vicinity of a gas leak.
13. The handset receiver may retain dangerous materials such as metallic
pins and staples because the receiver is magnetic.
IMPORTANT SAFETY INSTRUCTIONS
9
