30W/45W/60W/75W/90W/120W/140W/180W/210W/240W
Step three
Connect the power supply cable with remaining power
cable and do insulation and waterproof treatment.
Connection detail A (Please choose the actual power supply cable
color when do connection.)
Detail A
Detail A
Green/Yellow green
Please connect the same
color or same polarity.
Remaining cable
Female side of connector
Step four : Turn the luminaire handle counterclockwise by hand, adjust the lower bracket,
and hang the entire lamp obliquely into the two legs of the mounting bracket.(Drawing A),
then then push the lamp back, hang it into the lower leg of the mounting bracket(Drawing B),
and finally lock it with the wing nut.
Note that the arrow points to the driving direction during installation.
Mounting bracket
lower bracket
handle
Drawing A, push back
Wing nut
Drawing A
Drawing B
Step five: The male end of the lamp power connector is
plugged into the female end of the installed power cable
and tightened as shown below.
Female End
Male End
Tighten
Step Six: Loosen the handle counterclockwise by hand,
adjust the installation angle of the lamp to meet the
specified requirements, and then lock the handle clockwise.
Tight
loose
Main Technical parameters
Product Model
TL1F Series
Input Voltage
220-240v
Rated Power
Standard version:
30W/40W/55W/70W/85W/105W/130W/160W/200W/240W
High light efficacy version:
Working environment
Related humanity:
environment temperature :
Driver class
IP Rate
3306001865