manualshive.com logo in svg

Kingston Technology KTM609, Installation Manual

Share
Download
Kingston Technology KTM609 Installation Manual Download Page 22

Installing the Kingston EMS Driver

17

KTM-609/16 Installation Guide - Rev. D1

Kingston Technology Corporation

Installing the Kingston EMS Driver

You only need to perform the instructions in this section if you allocated some or all of
the new memory as 

Expanded

.

The Kingston EMS driver you are about to install is the program that manages the
paging of 16KB segments of memory into and out of the 64KB page frame located in
reserved high memory.

1. Make sure your PS/2 is booted from your standard DOS diskette in drive A, or

from the hard disk, drive C.  Remove the boot diskette from drive A, if
necessary, and insert the Kingston Option Diskette into drive A.  At the DOS
prompt, type:

A:

and press [Enter].

2. To start the INSTALL program, type:

INSTALL

Now when you press [Enter], the following screen appears:

INSTALLATION Version 1.0

(C) Copyright 1990, Kingston Technology Corporation

F1  Install Configuration Files onto Reference Disk

F2  Install KEMM.SYS EMS Driver onto a Working Disk.

F3  Change Existing EMS Driver Parameters.

F4  Exit and Back to DOS

Summary of Contents for KTM609














































Reviews:

No comments

Brands by name

Popular brands

Load more brands