Kingston Technology EtheRx KNE8TX/WG User Manual Download Page 26

20                                                   

Appendix F    Warranties and Notices

 

Kingston Technology Company 

KNExTX/WG User’s Guide - Rev. A00 

Warranty Claim Requirements 

To obtain warranty service, return the defective product, freight prepaid and insured, to 
your local authorized Kingston dealer or distributor, or to the Kingston factory service 
center located at 17600 Newhope Street, Fountain Valley, California 92708, U.S.A.  You 
must include the product serial number (if applicable) and a detailed description of the 
problem you are experiencing. You must also include proof of the date of original retail 
purchase as evidence that the product is within the applicable warranty period.  If you 
return the product directly to the Kingston factory, you must first obtain a Return 
Material Authorization ("RMA") number by calling Kingston Customer Service at 
(714) 438-1810, and include the RMA number prominently displayed on the outside of 
your package. Products must be properly packaged to prevent damage in transit. 

Free Technical Support 

Kingston provides free technical support.  If you experience any difficulty during the 
installation or subsequent use of a Kingston product, please contact Kingston’s Technical 
Support department prior to servicing your system. 

Kingston Technical Support can be reached in the U.S. at (714) 435-2639 or toll-free at 
(800) 435-0640 (U.S. and Canada only). Kingston European Technical Support can be 
reached from within the U.K. at 01932 738858. Kingston provides other service numbers 
when calling from Germany 0130 115 639 or fax 0130 860 599, from Austria 0660 5569 
or fax 06 607 434, from Switzerland 0800 557 748 or fax 0800 552 182, from France 
0800 905 701 or fax 0800 900 910, or from Belgium (in English) 0800 72763. 

This warranty covers only repair or replacement of defective Kingston products, as 
provided above.  Kingston is not liable for, and does not cover under warranty, any costs 
associated with servicing and/or the installation of Kingston products. 

Disclaimers 

The foregoing is the complete warranty for Kingston products and supersedes all 
other warranties and representations, whether oral or written.  Except as expressly 
set forth above, no other warranties are made with respect to Kingston products and 
Kingston expressly disclaims all warranties not stated herein, including, to the 
extent permitted by applicable law, any implied warranty of merchantability or 
fitness for a particular purpose.  In no event will Kingston be liable to the 
purchaser, or to any user of the Kingston product, for any damages, expenses, lost 
revenues, lost savings, lost profits, or any other incidental or consequential damages 
arising from the purchase, use or inability to use the Kingston product, even if 
Kingston has been advised of the possibility of such damages. 

Rev. 10/97 

Copyright © 1997 Kingston Technology Company.  All rights reserved.  Printed in the U.S.A.  Kingston Technology 
and the Kingston logo are trademarks of Kingston Technology Company. 

Summary of Contents for EtheRx KNE8TX/WG




























Reviews: