Pic
2
NOTE: it is important to keep all items dry during installation.
Choose a flat, level position for the Monitor that is no lower than maximum
fll level of the tank. Ensure the Transmitter does not sit at an a angle as this
can generate an incorrect level reading. Take care not to choose an area where
water can gather under the Monitor.
NOTE: If you are installing on a metal tank, the tank must have an existing gauge
hole where the sensor can be fitted in order for the tank to be compatible with
the Magnus monitor. This gauge hole is not required for Plastic tanks.
2. Identify the right location
Watchman Radar Transmitter
30cm
1. Check level, distance & height
Pic 1
Ensure before you start your install that the tank the
Watchman R is to be fitted:
1.
On a flat level base.
2.
A maximum actual tank height of 3 metres.
3.
Tank must be fitted in accordance with manufacturers
guidelines and instructions.
NB:
Any radio frequency signal may be seriously inhibited if
positioned underground. Please check that the transmitter /
receiver link works in the desired location before installation.
Keep these handy before you begin.
Alcohol wipes
Stixall sealant
Sand paper
Measuring tape
This product is to be used only on tanks
within the parameters outlined in the
specifications. Any use of the product on
applications that lie outside these
specifications is done so at users own risk.
Check
level,
distance
& height
Identify
the
right
location
Measure
your
tank
Fit
your
monitor
Begin
registration
Read fully before
installation & use
Magnet
Spirit Level
Watchman Radar
Installation Instructions 1.5