![Kingsman MQVL48LP Installation Instructions Manual Download Page 27](http://html1.mh-extra.com/html/kingsman/mqvl48lp/mqvl48lp_installation-instructions-manual_1970878027.webp)
MQVL48
Glass Front Removal / Installation
To remove Glass Front:
1. Remove the [Qty 4] Wing Nuts on the Upper Glass Retainer above the Glass Door Front and remove the Retainer.
2. Loosen the [Qty 4] Wing Nuts on the Lower Glass Retainer but do not remove.
3. Remove the Side Cover Panels.
4. Glass Door Front can now be lifted out of the fireplace.
5. Installation is the reverse of these steps.
Tighten wing nuts on Glass Front until they are snug. Wingnuts should be finger-tight
on Glass Front.
NOTE:
Do not over tighten nuts as glass could break.
Side Cover Panel
Upper Glass Retainer
X4
Ball of Gasket Faces Fireplace
Use caution when working with glass. Wear gloves. Suction Cups Recommended.
Side Cover Panel
27
Summary of Contents for MQVL48LP
Page 58: ...Gas Conversion for Modulator PART C 58 ...
Page 70: ...Proflame 2 Remote Control 70 ...
Page 72: ...72 ...