18
1. Remove glass door assembly and logs if installed. Be careful with logs as they become fragile after being heated.
2. Lift log supports off burner assembly by lifting straight upwards.
3. The burner or burner assembly can now be removed.
A - TO REMOVE BURNER ASSEMBLY
Locate and remove the 12 screws around the outside of the burner assembly (to remove entire burner assembly).
B - TO REMOVE (H) BURNER/ORIFICE CHANGE
Remove the 2 screws holding the (H) burner in, and slide leftwards off the orifice.
4. If removing entire burner assembly, break seal and lift upwards. Make sure the gas to the unit has been disconnected.
5. To reinstall the burner assembly, use high temp millpac to seal and secure with the 12 screws.
6. Reinstall log support, logs and door.
Burner Installation/Removal
