FPB30
Fire Bowl Warranty
GFRC materials have been engineered to provide the ultimate in durability and tested to ensure that they will withstand
the harshest of climatic conditions while retaining their good looks through the years.
All Fire Bowl (Bola) products are warranted against manufacturing defects for one year. Should your Kingsman product
experience damage due to a manufacturing defect, Kingsman will replace the damaged product free of charge (proof of
purchase is required). Installation, labor, and freight are not included.
This warranty does not include splitting, chipping, cracking or other damage that may be caused by impact, abrasion,
overloading or improper installation.
TABLE OF CONTENTS
Fire Bowl Warranty...................................................................................................................................................... 2
Table Of Contents....................................................................................................................................................... 2
Warnings..................................................................................................................................................................... 2
FPB30 Fire Bowl Setup............................................................................................................................................... 3-4
30FPB-KWK Decorative Key Way Valve Kit............................................................................................................... 5
Kingsman Outdoor Fire Pit Media Section.................................................................................................................. 6-7
!
WARNINGS
Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.
Young children should be carefully supervised
when they are in the area of the appliance.
Clothing or other flammable materials should not
be hung from the appliance, or placed on or near
the appliance.
Any guard or other protective device removed for
servicing the appliance must be replaced prior to
operating the appliance.
Installation and repair should be done by a
qualified service person. The appliance should be
inspected before use and at least annually by a
qualified service person. More frequent cleaning
may be required as necessary. It is imperative the
control compartment, burners and circulating air
passageways of the appliance be kept clean.
Inspect the fuel supply connection (including the
hose for LP models) before each use of the
appliance.
If it is evident there is excessive abrasion or wear,
or the hose is cut, it must be replaced prior to the
appliance being put into operation.
Cylinders must be stored outdoors in a well
ventilated area out of the reach of children.
Disconnected cylinders must have threaded valve
plugs tightly installed and must not be stored in a
building, garage or any other enclosed area.
Storage of this appliance indoors is permissible
only if it has been disconnected from its fuel supply
(natural gas line or LP gas cylinder).
LP GAS WARNINGS
The LP gas supply cylinder used with LP models
must be constructed and marked in accordance
with the specifications for LP-gas cylinders of the
U.S. Department of Transportation (DOT).
The pressure regulator and hose assembly supplied
with LP models must be used. Replacement
pressure regulators and hose assemblies must be
those specified in this manual.
The LP gas cylinder supply system must be
arranged for vapor withdraws.
The LP -gas cylinder used must include a collar to
protect the cylinder valve.
When an LP model is not in use, the LP-gas must
be turned off at the supply cylinder.
Fuel Supply line must not come into contact with
surfaces having temperatures in excess of 140°F. LP
gas cylinder must be kept a minimum of 4.5 feet from
the appliance.
You must use an approved LP cylinder retention
device.
2
f i r e - p a r t s . c o m
