Kingsman Fireplaces FP2085LPT Manual Download Page 25

LIMITED WARRANTY 

 

Save this certificate. It gives you specific legal rights, and you may also have other rights which may vary from one 

province or state to another. 
In the event your unit needs servicing contact your dealer or contractor who installed or services your unit. When 

requesting service, please have the model and serial number from each unit readily available. If your dealer needs 

assistance, the distributor is available for support and we, in turn support the distributor's efforts. 

Fill in the installation date and model and serial numbers of the unit in the space provided below and retain this limited 

warranty for your files. 

GENERAL TERMS 

This limited warranty applies only while the unit remains at the site of the original installation and only if the unit is installed 

inside the continental United States, Alaska, Hawaii and Canada. The warranty applies only if the unit is installed and 

operated in accordance with the printed instructions and in compliance with applicable installation, building codes and 

good trade practices. 
This limited warranty further does not cover any scratches, dents, painted finishes, corrosion or discoloring by heat, 

abrasive and chemical cleaners, nor chipping on powder coated parts. 
During the first year after installation, we will provide a replacement for any component part of your unit found to be 

defective in materials or workmanship. The part to be replaced must be returned to our distributor in exchange for the 

replacement part. 
In lieu of providing a replacement part, we may, at our option, provide the distributor's component purchase price from us 

or a credit equal to the distributor’s component purchase price from us toward the purchase of any new unit which we 

distribute. If a credit is given in lieu of a replacement part, the rating plate from the unit being replace must be submitted 

on a warranty claim and the unit being replaced must be made available to our distributor for disposition. 
In establishing the date of installation for any purpose including determination of the starting date for the term of this 

limited warranty, reasonable proof of the original installation date must be presented*, otherwise the effective date will be 

based upon the date of manufacture plus thirty (30) days. 
Any labor, material, freight and/or handling charges associated with any repair or replacement pursuant to this limited 

warranty will be your responsibility. In this warranty the word "installation" means original installation. 
We will not be responsible for and you the user will pay for: (a) damages caused by accident, abuse, negligence, misuse, 

riot, fire, flood, or Acts of God (b) damages caused by operating the unit where there is a corrosive atmosphere containing 

chlorine, fluorine, or any other damaging chemicals (other than in a normal residential environment) (c) damages caused 

by any unauthorized alteration or repair of the unit affecting its stability or performance (d) damages caused by improper 

matching or application of the unit or the unit's components (e) damages caused by failing to provide proper maintenance 

and service to the unit (f) any expenses incurred for erecting disconnecting or dismantling the unit (g) parts or supplies 

used in connection with service or maintenance (h) damage repairs, inoperation or inefficiency resulting from faulty 

installation or application (i) electricity or fuel costs or any increase in electricity or fuel cost whatsoever including 

additional or unusual use of supplemental electric heat. 
We shall not be liable for any incidental, consequential, or special damages or expenses in connection with any use or 

failure of this unit. We have not made and do not make any representation or warranty of fitness for a particular use or 

purpose and there is no implied condition of fitness for a particular use or purpose. We make no express warranties 

except as stated in this limited warranty. No one is authorized to change this limited warranty or to create for us any other 

obligation or liability in connections with this unit. Any implied warranties shall last for one year after the original 

installation. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or 

do not allow limitations on how long an implied Warranty or condition lasts so the above limitations or exclusions may not 

apply to you. The provisions of this limited warranty are in additions to and not a modification of or subtraction from any 

statutory warranties and other rights and remedies provided by law. 
Model No.:_____________________________________________ Serial No.:_________________________________ 
Date Installed: ___________________________________________ 

*You must retain the original records that can establish the installation date of your unit. 

25

Summary of Contents for FP2085LPT


























Reviews: