STEP-III
Carefully take the TABLE BASE and insert the LEG tenons into the respective mortise
holes of the TABLE BASE. Make sure that the numbered or lettered tenons match the
mortise holes. Using a rubber mallet or a regular hammer with a wood block between the
hammer and the wood, drive the tenons and mortise holes together until all joints fit
snugly together.
NOTE: Do not force
dowels. Any excess can
be easily sanded away
.
STEP-IV
Drive the wooden dowels through the tenons of the LEGS. Two dowels should be driven
through each tenon for all tables. Drive the dowels using direct sharp blows with a
hammer. Take care not to mar the wood. You may want to sand lightly to smooth out any
rough edges.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
*KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE IF THESE
INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200
Gateway Court, Manassas, Virginia 20109
Phone. 703-361-7000, Fax. 703-361-7001
