ASSEMBLY INSTRUCTIONS FOR THE TR-114
LEG ASSEMBLY TABLE TOP ASSEMBLY DOWELS LEG ASSEMBLY
* NOTE
A TENON
B MORTISE HOLE
LEG SUPPORT BRACKETS
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match the tenons and mortise holes with the
corresponding letters or numbers stamped on the furniture.
STEP-II
Making sure to carefully match the
numbers / letters stamped on the
component
parts,
fit
SHORT
STRETCHER tenons into the
respective mortise holes of the
BOTTOM LONG LEG STRETCHERS and dowel assembly as shown.
STEP-III:
Again, (very important) carefully matching the numbers / letters stamped on the components,
fit the STRETCHER assembly into the LEG ASSEMBLY frames as shown above.
