STEP-IV
Carefully fit the rem aining END FR AME mortise holes over all exposed
tenons and using a rubber m allet or a regular hammer with the sanding block
between the hammer and the wood. Gently drive all the mortise holes onto the
tenons until all joints fit snugly together.
Placing the sanding block between
the wood and the hammer head will prevent marring of the wood.
STEP-V
Fit the TOP BACK RAIL to the tenons of the BACK and the END FRAME as
shown in assembly photo.
LONG DOWELS
SHORT DOWELS
STEP-VI
Carefully hammer dowels into the pre-drilled holes of the assembly, details are shown in the
photographs.
Again, use the sanding block between the dowel head and the hammer head
for the last few blows, this will prevent marring the wood.
NOTE: DO NOT FORCE THE DOWELS; ANY EXCESS CAN EASILY BE SANDED
AWAY. IF THE DOWELS ARE NOT FLUSH DO NOT CONTINUE TO DRIVE THE
DOWELS, YOU MIGHT DAMAGE THE ITEM.
STEP-VII
Using a proper screw driver, insert a nd secure the SEAT as shown in the
assembly photo. Use of a power sc
rewdriver or drill could dam age the
furniture.
1
IF YOU HAVE ANY QUESTIONS REGARDING ASSEMBLY OF YOUR
2
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: 703-361-7000, Fax: 703-361-7001
