STEP-IV
Carefully hammer the proper dowels into the pr e-drilled holes of the assem bly, details are
shown in the photographs and all dowels (and/or dowel bags) are marked to match where they
go.
NOTE: DO NOT FORCE THE DOWELS; ANY EXCESS CAN EASILY BE SANDED
AWAY. IF THE DOWELS ARE NOT FLUSH DO NOT CONTINUE TO DRIVE THE
DOWELS, YOU MIGHT DAMAGE THE ITEM.
STEP-V
Place SEAT SCREEN into SEAT FRAME as shown in photograph.
TO CONNECT UNITS OF SECTIONAL GROUP, THERE ARE
2 CLIPS SUPPLIED PER UNIT. PU SH THE UNITS TOGETHER AND
INSERT THE CLIP OVER THE CORRESPONDING SIDE RAILS. WE
RECOMMEND YOU USE 2 CLIPS PER SECTION, 1 CLIP LOCATED
IN FRONT AND 1 CLIP LOCATED IN THE REAR.
1
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: 703-361-7000, Fax: 703-361-7001
