kingsley-bate Essex TR36 Assembly Instructions Download Page 3

Page: 3 / 3

STEP-III

Carefully take the TABLE BASE and insert the LEG tenons into t he respective mortise

holes of the TABLE BASE. Make sure that the numbered or lettered tenons m atch the

mortise holes. Using a rubber mallet or a regular hammer with a wood block between the

hammer and the wood, drive the tenons and m ortise holes together until all joints fit

snugly together.

NOTE: Do not force

dowels. Any excess can

be easily sanded away

STEP-IV

Drive the wooden dowels through the tenons of the LEGS. Two dowels should be driven

through each tenon for all ta bles. Drive the dowels using direct sharp bl ows with a

hammer. Take care not to mar the wood. You may want to sand lightly to smooth out any

rough edges.

IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR

KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE

DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU

FOR CHOOSING OUR FURNITURE.

*KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE IF THESE

INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

7200

Gateway Court, Manassas, Virginia 20109

Phone. 703-361-7000, Fax. 703-361-7001

Summary of Contents for Essex TR36

Page 1: ...Kingsley Bate TR36 42 50 60 Essex Round Dining Table Assembly Instructions...

Page 2: ...se match all joints with t he corresponding letters or numbers stamped on the furniture NOTE A TENON B MORTISE HOLE 2STEP II Place the TABLE TOP face down and carefully insert the LEG tenons into the...

Page 3: ...the wooden dowels through the tenons of the LEGS Two dowels should be driven through each tenon for all ta bles Drive the dowels using direct sharp bl ows with a hammer Take care not to mar the wood...