STEP-IV
Place the assembled chair upside down on top of a table so chair sits level as seen in the
above photographs. Place the small brackets into place and insert the KD bolt in the center
first using the Allen key provided. Insert the screws using a proper screw driver. We strongly
suggest you do not use a power screwdriver; the torque could easily drive the screws too far
into the bracket and damage the END FRAME.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
*KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200 Gateway Court, Manassas, Virginia 20109
Phone: 703-361-7000, Fax: 703-361-7001
