KINGSLEY–BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE CL-18
SEAT
BACK
* NOTE:
A TENON
B MORTISE HOLE
RIGHT END FRAME LEFT END FRAME
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match all joints with the corresponding
letters or numbers stamped on the furniture.
STEP-II
Fit the BACK, BOTTOM LEG STRETCHER and FRONT SEAT RAIL
tenons into the end frame mortise holes. If necessary, gently rock the
parts while pushing tenons into place until joints fit snugly together.
STEP-III
Fit the remaining END FRAME mortise holes onto all exposed tenons
as shown in photographs and carefully upright chair by lifting it and
setting it down while holding the END FRAMES in place securely.
