KINGSLEY–BATE
Fine Garden Furniture
0
ASSEMBLY INSTRUCTIONS FOR THE CO-15
RIGHT END FRAME BACK
SEAT
LEFT END FRAME
* NOTE:
5
A TENON
6
B MORTISE HOLE
1
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match all joints with the corresponding letters
or numbers stamped on the furniture.
2
STEP-II
Fit the BACK and SEAT tenons into t he END FRAME
mortise holes using the stamped num bers or letters as
guides. If necessary, gently rock the BACK and SEAT
while pushing the tenons into the m ortise holes until all
joints fit snugly together.
3
STEP-III
Fit the remaining END FRAME m ortise
holes over and onto all exposed tenons
and using a rubber ma llet gently tap the
END FRAME evenly until all joints fit
snugly together. Carefully hammer
dowels into the pre-drilled holes of the assembly, details are shown in the photographs. All
dowels and dowel holes are prope rly marked with stickers.
NOTE: DO NOT FORCE THE
DOWELS; ANY EXCESS CAN EASILY BE SANDED AWAY. IF THE DOWELS ARE
NOT FLUSH DO NOT CONTINUE TO
DRIVE THE DOWELS, YOU MIGHT
DAMAGE THE ITEM.
