30 Bottle Lattice Cube Assembly Instructions | WCL30
PWRAP25 Assembly Instruction
Parts included
Step1
Step2
Step3
Step4
Put the wood tenon insert into
the holes which in the long plank
and add the white glue.
Put the short wooden blocks
insert into the wood tenon.
Put the wooden tenon insert into the
holes which in the another side of
the short wooden blocks and add
the white glue again.
Put the wooden tenon insert into
the anotherlong plank after
assembled all the tenons and
short wooden blocks.
Adjust and tap gently the base
till to stable.
Long plank
Short wooden blocks
white glue
Instruction Manual
List
The whole installation process
is done.
Attention
:
This instruction is applicable to other similar wood bases.
Step1
Step2
Step3
Step4
Step5
Step6
*1
①
②
③
④
⑤
Remarks:The caps is used to cover the screw holes.
*2
*4
*24
*24
Step
1
Step
2
Step
3
*
2 PCS
*
2 PCS
*
1 PCS
Caps:12 pcs
Remarks:
1.The caps is used to cover the screw holes.
2.Please use the hammer to tap them to be stable
.
*
12 PCS
Caps: 24pcs
Side shelf
Middle shelf
top shelf: 2 pcs
5*30 screws: 24 pcs
Screw a side shelf into the bottom shelf as shown.
Screw 4 middle shelves into the bottom shelf one by
one same as step1.
Screw the top shelf into the top of side and middle
shelf as shown.
Cover the screw holes with wood plugs one by one
as shown.
30 Bottle Wine Rack ALDA
Assembly Instruction
Parts included
Step1
Step2
Step3
Step4
①
②
③
④
⑤
*2
*2
*1
*12
*12
side shelf: 2 pcs
middle shelf: 4 pcs
Screw two vertical battens into a layer board
as shown.
Screw the other two vertical battens insert into
the other side of layer board as shown.
Screw the other 5 pieces of layer boards into
Vertical battens one by one as shown.
When tighten the wood plugs with hammer,pls use the
wood block to protect the surface of the wood plugs.
Top
and
bottom shelf
Screw
Wood plug
*2
M3.5*30
