③
Light/Fahrenheit/Celsius Switch button
：
Press the light each time, the light will be ON or OFF. Press 3 seconds and display screen will be
converted to Celsius or Fahrenheit degrees.
④
Setting down button
：
Temperature or humidity will decrease by 1°C or 1% per press.
⑤
Setting up button
：
Temperature or humidity will increase by 1°C or 1% per press.
⑥
UV
system
control
instruction
1. Automatic control:
The machine is power on. If the UV light doesn’t be turned on by human,
the UV light will turn on for every 24 hours. The times will be 1 hour.It means every 24 hours, the
UV light will be on 1 hour.
2.
Manual control:
The machine is power on.Please press light button 3 seconds, the UV light will
be always on.Please press light button 3 seconds again, and then the UV light will turn o
ff
.
3. When
the
UV
light
turn
on
,the
UV
light
will
be
closed
when
door
is
open
,and
it
will
be
on
when
door
is
closed.
Note:
The
life
of
the
UV
lamp
is
12
months.
Exceeding
the
service
life
will
greatly
reduce
the
anti-
virus
e
ff
ect
of
the
UV
lamp.
⑦
Humidification System
：
Indicates the humidification function is started.
⑧
：
Dehumidification System:
Indicates the dehumidification function is started.
⑨
The Fault System
：
Indicates that the fault alarm function is started.
⑩
Setting Temperature Display: Display setting temperature
Actual Temperature display: Display actual indoor temperature
HuHumidity Display: Display setting humidity and actual humidity.
DEFROSTING/CONDENSATION/ HYGROMETRY/
VENTILATION
Your Steak Ager is designed with “Auto-cycle” defrost system. During “O
ff
-cycle” the refrigerated
surfaces of the Steak Ager defrost automatically. Defrost water from the Steak Ager storage
compartment drains automatically and part of it goes into a drainage container, which is located
14
