Each refrigerator includes an operating panel on the front of the unit. This
operating panel includes several features to operate and control the
temperature of both the LEFT and RIGHT zones of the refrigerator.
The operating panel includes the following features:
ON/OFF:
Turns the refrigerator power on or off.
SET :
Select temperature display setting from Fahrenheit to Celsius
degree by pushing the “SET” button. Fahrenheit or Celsius degree
indicator will appear in blue color in the “0°C” or “0°F” window.
LIGHT:
Turns the interior refrigerator light on or off.
!
CAUTION:
BEFORE YOU START: The refrigerator should be placed in a location
where the ambient temperature is between 32 - 100 degree Fahrenheit
.
If
the ambient temperature is above or below this range, the performance of
the unit may be affected. For example, placing your unit in extreme cold
or hot conditions may cause interior temperatures to fluctuate.
SETTING THE TEMPERATURE CONTROL
1.
Make sure power cord is connected to a properly grounded outlet.
2.
Turn Power ON.
3.
Each zone is independently controlled.
•
LEFT Zone: The temperature setting can be adjusted between
32°F to 46°F
•
RIGHT Zone: The temperature setting can be adjusted between
41°F to 64°F
4.
Set the temperature of the LEFT Zone or RIGHT Zone as you desire
by pushing the UP (+) or DOWN (-) button. When you push the two
buttons for the first time, the LED readout will show the original
temperature set at previous time.
5.
The temperature that you desire to set will increase 1°F if you push
the UP(+) button once, and alternatively will decrease 1°F if you push
the DOWN (-) button once.
6.
Once you have set the desired temperature, wait 5 seconds. The
temperature shown in the both LEFT and RIGHT zone display panels
will automatically switch to show the actual temperature inside the
unit. The actual temperature will always be shown until the next time
you press the UP (+) or DOWN (-) button to change the temperature
settings.
7.
NOTE:
The desired temperatures may fluctuate depending on
whether the interior light is ON or OFF and depending on the
orientation of the bottles.
!
PART V
TEMPERATURE SETTINGS FOR WINE SERVICE
1.
Different varietals of wine require different temperature settings. The
recommended temperature ranges for serving different varietals of
wine are listed below. Your refrigerator will indicate when you have
set the LEFT/RIGHT zones to the below temperature ranges.
•
Red Wines: 52-64°F
•
White Wines: 44-51°F
•
Sparkle Wines: 41-43°F
2.
If you set the LEFT or RIGHT zone between
52-64°F,
the LED light
next to “RED” will light up, indicating that you are within the
recommended range for serving Red Wines.
3.
If you set the LEFT or RIGHT zone between
44-51°F,
the LED light
next to “WHITE” will light up, indicating that you are within the
recommended range for serving White Wines.
4.
If you set the LEFT or RIGHT zone betwee
n 41-43°F
, the LED light
next to “SPARKLE” will light up, indicating that you are within the
recommended range for serving Sparkle Wines
!
CAUTION:
!
1.
In the event of a power interruption, all previous temperature settings
will be automatically saved and each compartment will return to the
previous temperature setting.
2.
If the unit is unplugged, loses power, or is turned off, you must wait
over 6 minutes before restarting. Within this 6 minutes, compressor
protect itself and will not start even power ON again
3.
When you use the refrigerator. for the first time or restart the
refrigerator after having been shut off for a long time, there will be a
few degrees variance between the temperature you select and the
one indicated on the LED readout for the first few hours of operation.
After a few hours of operation, the temperature will normalize to the
OPERATION
PART IV
OPERATING YOUR REFRIGERATOR
www.kingsbottle.com
7
Summary of Contents for KBU-28LR
Page 13: ...NOTES www kingsbottle com 13...
