3
The Kwiky RTT is symmetrical, provided
1. Un-pack all the components from the box.
2. Lift the Kwiky onto your vehicle’s roof rack.
Position so that the weight is centred evenly
over the roof. FIGURE 1
3. Assemble 4 of the flat brackets
with 2 bolts each. FIGURE 2
4. With the flat brackets assembled, lift the side
of the Kwiky and slide 2 flat brackets with
bolts along each mounting rail. FIGURE 3
5. Slide the flat brackets with bolts along the
mounting rails, so that they align with the roof
rack’s cross-bars. FIGURE 4
Do not clamp onto your roof racks mesh.
The Kwiky should have 4 spaced, strong
points of contact on the roof rack. FIGURE 5
6. Connect the 4 remaining flat brackets with
2 nuts each. FIGURE 6
Tighten all the nuts, making sure the Kwiky
is firmly mounted and will not move. The flat
brackets should have a slight bend around
the cross bar.
7. Take the vehicle for a low-speed, short drive.
Afterwards, check all the bolts are secure.
Tighten if required.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
INSTALLATION INSTRUCTIONS
At least 2-3 people are needed to install a Kwiky RTT.
DO NOT try and lift and install the Kwiky on your own.
Summary of Contents for Kwiky
Page 1: ...RoofTopTent USER MANUAL...
