5
OPERATING THE MPPT CONTROLLER
Please note: not following these instructions may cause damage to the MPPT controller.
Ensure that you attach the positive (+) and negative (-) wires to the appropriate terminals.
1. Connect the positive and negative wires from the battery into the terminals with the battery
icon ensuring polarity is correct.
2. The solar indicator light will turn on.
3. Connect positive and negative solar input into the two terminals with the solar icon, ensuring
polarity is correct.
4. The controller is now ready to use.
5. For additional load circuit, connect positive and negative wires to the terminals with the
lightbulb icon on the controller.
NOTE:
Ensure a fuse is used on battery positive wiring to prevent short circuits and potential
damage to the unit or your vehicle